Suzuki LT-Z400 Parts & Accessories

American Star
MX PRO Chromoly Racing Tie Rods & Ends!

These Lifetime Structurally Warranted 4130 Chromoly Tie Rods are
the very best in the industry today. The High Quality Sealed Tie Rod
Ends are 12mm Male ends. This set upgrades your 10mm tie rod
ends that are prone to failure to a much heavier duty 12mm rod end
assembly. This is the answer to not braking ends. We Guarantee It!
Each kit includes two (2) Lifetime Structurally Warranted Tie Rods,
Four (4) Tie Rod Ends along with Jam Nuts, Washers and Castle
Nuts. Available in Stock, +1, +2 and+3 lengths.
Speedlinez Stainless Steel "2 Line" Racing Front
Brake Line Kit
Superior Quality Braided Stainless Steel PFTE Lined Front ATV
Racing Brake Lines. These are the very best quality lines on the
market today. By attaching at the Brake Reservoir with a Double
Banjo Bolt the Front lines T-Block is eliminated.  These lines will
dramatically improve your braking by eliminating pressure line flex
and improving brake modulation by firming up the pull at the brake
lever or pedal. Additionally they carry more fluid which enhances
cooling and have a burst pressure 3 times greater than that of a
rubber brake hose. You won't get a better set of Brake Lines at
twice the price. SPEEDLINE'Z guarantee's it! All
SPEEDLINE'Z
Brake Lines have a lifetime warranty.
Speedlinez Braided Stainless Steel Rear Racing
Brake Lines
You are looking at American Stars SPEEDLINE'Z Superior Quality
Brake Lines. These are the very best quality ATV Brake Lines on
the market today GUARANTEED! These lines will dramatically
improve yourbraking by eliminating pressure line flex and
improving brake modulation by firming up the pull at the brake lever
or pedal. Additionally they carry more fluid which enhances cooling
and have a burst pressure 3 times greater than that of a rubber
brake hose.
All
SPEEDLINE'Z Brake Lines have a lifetime warranty.
American Star Suzuki LT-Z400 Swing-Arm &
Bearing Carrier

American Star Elliptical Tube 4130 Chromoly Racing Swing-Arms
are without a doubt the very best built, very best looking
Swing-Arms in the industry today. Super strong, they are
manufactured out of Oval Tube .095 wall 4130 Aircraft Grade
Elliptical Chromoly Tubing. Notice 4 Bolt Pinch Tubes at the rear.
They are available with or without skid plates and in Lite-Weight.
.065, Standard .095 and Heavy Duty .120 configurations In Stock up
to plus 12 inch configurations. Please tell us the length you need
when you order. Your Stock Bearing Carrier Will NOT This
Swing-Arm. Requires a round housing carrier like seen below.
American Star MX PRO Racing A-Arms

American Star MX PRO Camber/Caster Racing A-Arms are
manufactured out .083 Wall One Inch 4130 Chromoly Aircraft Grade
by our Certified Welders. There is a Gusset Plate added to shock
from damage. They come complete with all hardware shown in the
picture on the left. Please click on the picture for a closeup view.
This Arm takes a stock length shock and is 2 inches a total of 4
inches overall. Designed for maximum travel, this arm comes with
our automotive style sealed ball joints. Comes with a lifetime
structural warranty too.
$39.95
$29.95
$79.95
$69.95
$729.95
$64.95
$89.95
$129.95
$149.95
$429.95
$429.95
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States

American Star Chromoly Racing Tie Rods

American Star Heavy Duty 4130 Chromoly Racing Tie Rods are
available in Stock, +1, +2, +3 and +4 lengths. T
he Female Style Tie
Rods
are precision manufactured out of Precision Formed,
Seamless Heat Treated .120 Wall 5/8 inch Tubing  with Precision
machined 304 Stainless Steel 10.125mm or 12.125mm external
Threaded Ends TIG Welded in. These will take your stock tie rod
ends. All American Star Racing Tie Rod Sets are lifetime
structurally warranted against bending or breaking. Be sure to
select the size you need when ordering. Available in Stock, +1, +2
and +3 lengths.
Chromoly Tie Rod Upgrade Kits With H-D 12mm
Ends!

American Star Tie Rod Upgrade Kits are a great choice.  
Economically priced and quality manufactured. The smaller factory
10mm tie rod ends that are prone to failure are replaced much
heavier duty 12mm rod end assembly. This the answer to not
braking ends. We Guarantee It! Each kit includes two (2) Tie Rods,
Four (4) Tie Rod Ends along withJam Nuts, Washers and Castle
Nuts. Available in stock width only.
American Star PRO X-Series Racing Tie Rods

ASR  PRO X-SERIES RACING TIE RODS are manufactured out of
Precision Formed, Seamless, Heat Treated .120 Wall 5/8 inch
Aircraft Grade Steel Tubing With Precision TIG Welded 304
Chromoly Teflon/Kevlar Lined Heim Ends are rated at 16,238
Yamaha owners  these replace your weak stock style tie rods and
rod ends. With most OEM tie rod ends being about 45.00 each (x4)
BEST and STRONGEST Racing Tie Rod Set! Available in Stock, +1,
+2 and +3 lengths.
Speedline'z "3 Line" Front Brake Line Kit

You are looking at American Stars SPEEDLINE'Z Superior Quality
These 3 Piece Lines are the very best quality lines on the market
today. These lines will dramatically improve your braking by
eliminating pressure line flex and improving brake modulation by
firming up the pull at the brake lever or pedal. Additionally they
pressure 3 times greater than that of a rubber brake hose. You
won't get a better set of Brake Lines at twice the price.
SPEEDLINE'Z guarantee's it!
Lifetime Warranty to the original purchaser.
American Star OEM Style Replacement Tie Rod

You are looking at a set of American Star (OEM) style replacement
Rod Ends.  Only 1 Kit  is necessary to replace both sides. They fit
your stock OEM Tie Rods and all after market Tie Rods that utilize
your stock ends. With OEM stock replacement ends running as
much as 50.00 each per end, these ends are a really outstanding
deal!
Size Needed
Size Needed
Size Needed
$499.95
American Star PRO X Long Travel Racing A-Arms
American Star PRO X Long Travel Racing A-Arms are
manufactured out of .083 wall 4130 Chromoly Aircraft Grade Steel.
They are CNC bent and shaped and then precision TIG welded by
our Certified Welders.. There is a Gusset Plate added to the bottom
of the A-Arm for added strength and to protect the shock from
damage. They come complete with all hardware shown in the
picture on the left. Please click on the picture for a closeup view.
This Arm takes a Long Travel 18 3/4 shock and is 2 inches wider
per side than stock. Widening your bike a total of 4 inches overall.
rated MAX Travel Chromoly Heim Ball Joints
Solution Graphics
Size Needed
Size Needed
Size Needed
Size Needed
Color Needed
Size Needed
Color Needed
Size Needed
Color Needed
Size Needed
Color Needed
American Star PRO X Racing A-Arms
American Star Pro X A-Arms are manufactured out .083 Wall One
Inch 4130 Chromoly Aircraft Grade Steel. They are CNC bent and
shaped and then precision TIG welded by our Certified Welders.
There is a Gusset Plate added to the bottom of the A-Arm for added
strength and to protect the shock from damage. They come
complete with all hardware shown in the picture on the left. Please
click on the picture for a closeup view. This Arm takes a stock
length shock and is 2 inches wider each side and 1 inch forward
for a total of 4 inches overall. Designed for maximum travel, this
arm comes with our MAX Travel Chromoly Heim Ball Joints.
Lifetime Structurally warranted.